 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin 700-SA Solid-State Relays Overview/Product Selection Bulletin 700-SA * * * * * 5 A (Resistive) Max. Continuous Load Current 264V AC or 125V DC Max. Load Voltage Range Photocoupler Isolation Between Control and Load Voltage LED Indicator for Input/Logic ON/OFF Status Monitoring 700-HN100, -HN125, -HN 202, or -HN108 Socket Compatible Table Of Contents Product Selection . . . . . . . Accessories . . . . . . . . . . . . Specifications . . . . . . . . . . Approximate Dimensions . . . . . . . . . . . . 31 32 34 36 Product Selection Input-to-Output Isolation Method Zero Cross Function LED Indicator Rated Output (Load) Max. Current and Voltage Range Rated Input Control Voltage Cat. No. Factory-stocked Item (Single Pack) Yes 5 A @100...240V AC 700-SAZY5Z25 Photocoupler Yes 5...24V DC -- 3 A @ 5...110V DC 700-SANY3Z25 31 Bulletin 700-SA Solid-State Relays Accessories Description Pkg. Quantity Cat. No. Factory-stocked Item Screw Terminal Tube Base Socket -- Panel or DIN Rail Mounting; Guarded Terminal Construction Order ten or multiples of ten Cat. No. 700-HN100 10 700-HN100 Specialty Socket 8-pin backwired socket with solder terminals Order ten or multiples of ten Cat. No. 700-HN108 10 700-HN108 Screw Terminal Tube Base Socket -- Panel or DIN Rail Mounting; Open Style Construction Order must be for 10 sockets or multiples of 10. No retainer clip required. Cat. No. 700-HN125 10 700-HN125 DIN Rail Mounting Pack Standard 35 x 7.5 mm DIN Rail, 1 meter long, 10 rails per package. Order must be for 10 rails or multiples of 10. Cat No. 199-DR1 10 199-DR1 Pre-printed identification tags -- contains 10 sheets of pre-printed and blank tags. Each sheet contains 13 sets of the markings CR...9CR, TR...9TR, M...9M, F, R, 1S, and 117 blank tags. Tags are peel-off with sticky backing for easy placement on relays. Blank identification tags -- contains 10 sheets of blank identification tags for customer specialized printing. Each sheet contains 546 blank tags. Tags are peel-off with sticky backing for easy placement on relays. 10 700-N40 10 700-N41 Retainer Clip for Cat. No. 700-HN153 Sockets with 700-SA Relays Secures relay in socket. Order must be for 10 clips or multiples of 10. 10 700-HN158 Sample Retainer Clips 8-Pin Socket -- can be used with or without timing attachment Order ten or multiples of ten 10 700-HN202 32 Bulletin 700-SA Solid-State Relays Accessories, Continued Description Pkg. Quantity Cat. No. Factory-stocked Item Multi-Function Multi-Range Time Module 1 700-HT2 Cat. No. 700-HT2 33 Bulletin 700-SA Solid-State Relays Specifications Control/Input Ratings Cat. No. 700-SAZY5Z25 700-SANY3Z25 Rated Control Voltage 5...24V DC Operating Control Voltage Range 4...30V DC Impedance 1.5 K (+20% -10%) Load/Output Ratings Applicable Load Cat. No. -- 700-SAZY5Z25 700-SANY3Z25 Item Load Switching Method/Device Pick-up time Drop-out time Output ON voltage drop Output Leakage current Output VDRM VCEO (V) Output di/dt (A/uS) Output dv/dt (V/uS) Output I2t (A2S) Output Tj (C) Max. Insulation resistance Dielectric strength Vibration resistance (max.) Shock resistance (max.) Ambient temperature Ambient humidity Standards Weight Operating Storage Rated Load Voltage -- 100...240V AC 5...110V DC Load Voltage Range -- 75...264V AC 3...125V DC Characteristics 700-SAZY5Z25 Triac 1/2 cycle of load power source + 1 ms max. 1/2 cycle of load power source + 1 ms max. 1.6 V (RMS) max. 5 mA max. (at 100V AC); 10 mA max. (at 200V AC) 600 50 500 41.6 125 100 M min. (at 500V DC) 1,500V AC, 50/60 Hz for 1 min. 10...55 Hz, 1.5 mm double amplitude (10 G) 1,000 m/s2 (100 G) -30...80C (-22...176F) with no icing or condensation -30...100C (-22...212F) with no icing or condensation 45...85% (no condensation) UL508, CSA C22.2 , VDE, CE Approx. 70 g 700-SANY3Z25 Transistor 0.5 ms max. 2.5 ms max. 1.5 V max. 5 mA max. (at 125V DC) 150 -- -- -- 150 Continuous Load Current (Resistive) Min. 0.1 A 0.1 A Max. 5.0 A 3.0 A 80 A, @50/60 Hz for 1 cycle 12 A (10 ms) Max. Inrush Current Control Voltage Levels Pick-up Voltage 4V DC max. Drop-out Voltage 1V DC min. If the SSR operation is continuous ON/OFF, this value should be reduced by 50%. Refer to "Inrush Current Resistivity" graphs below. Refer to the following graph "Load Current Vs. Ambient Temperature Characteristics" for additional load current details. Load Current vs. Ambient Temperature Characteristics 700-SA 700-SAZY5Z25 Inrush Current Resistivity 700-SA 700-SANY3Z25 Inrush current (A. Peak) Load current (A) 700-SAZY5Z25 700-SANY3Z25 Ambient temperature (C) Energizing time (ms) Inrush current resistivity is the ability of an SSR to withstand a large surge current for a short period of time. Surges are considered non-repetitive (max. repeatability once every 5 seconds). Keep the inrush current to half the rated value if it occurs repetitively. Exceeding the non-repetitive inrush current will damage the SSR. 34 Bulletin 700-SA Solid-State Relays Specifications, Continued Terminal Arrangement (Bottom View) (-) Load Load power supply Load Input ( ) - (+) Input voltage + Note: The plus and minus symbols shown in parentheses are for DC loads. Basic Application Considerations High Density Mounting of Multiple SSRs If multiple SSRs are installed side by side be aware that the outer case wall of the SSR serves to dissipate heat. Install the relays so that they are adequately ventilated. If poor ventilation is unavoidable, reduce the load current to half. Protective Component When controlling AC inductive loads, connect an inrush/surge absorbing device (varistor) across the SSR load terminals. If the SSR has built-in surge suppression (Bulletins 700-SE and 700-SH) and additional surge suppression is required, connect the varistor across the terminals of the load device . Select a varistor that meets the conditions of the load voltage outlined in the table below. Load Voltage 100...120V AC 200...240V AC 380...480V AC Varistor Voltage 240...270 V 440...470 V 820...1000 V 1000 A min. Varistor Surge Resistance For additional details applying solid-state relays, refer to pub. 700-AT001A-EN-E, "Solid-State Relay Application Guide" available at www.theautomationbookstore.com. 35 Bulletin 700-SA Solid-State Relays Approximate Dimensions Note: All units in millimeters unless otherwise indicated. Dimensions are not intended to be used for manufacturing purposes. 700-SA 35 max. 35 max. 52.5 max. Bulletin 700-SA is compatible with cat. nos. 700-HN100, -108, -125, and -202 (sockets). 36 |
Price & Availability of 700-HT2
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |